PVC Cable Trunk Extruson/ Prouction Line

• Customization: Available
• Type: Pipe Extruder
• Plastic Processed: PVC
• Product Type: Profile Extrusion Molding Machine
• Feeding Mode: One Feed
• Assembly Structure: Integral Type Extruder
• Screw: Twin-Screw
• Engagement System: Full Intermeshing
• Screw Channel Structure: Deep Screw
• Exhaust: Exhaust
• Automation: Automatic
• Computerized: Computerized
• Production Name: PVC Cable Trunk Extruson/ Prouction Line
• Transport Package: Wooden Case
• Specification: CE, ISO
• Trademark: Sino-tech
• Origin: China
• HS Code: 84772090
• Production Capacity: 100PCS/Year

Product Description

PVC cable trunk/trunking profile extrusion production line
1. Our company is cooperating with many universities to develop the urgently needed plastic machine. It also absorbs advanced technology from abroad to achieve the purpose of supplying complete machine and technology.

2. PVC edge band machine
3. The PVC edgeband Extrusion Line is used for extruding PVC edgeband. The edgeband in the form of roll has its thickness of 0.5-4.0 mm and width of 5-300mm depending on the requirments. Its length is not limited. This product is featured by its good banding effect, easy operation and high utilization rate, therefore it is applicable to mechanical banding of solid furniture, composite doors and WPC doors.

Item	Technical parameter
I. SJ65/25 Single Screw Extruder
Supplier of electric control cabinet	Main transducer and feeder' s transducer: Hitachi transducer; Air switch
Output capacity	80kg/h(approximate)
Inlet wire terminal of power source	3-phase, 4-wire system
Motor power	Main motor: AC30kw
Temperature control curve type	Temperature fluctuating self-adjustment(PID type)
Temperature control meters, manometers and speedometers	RKC(Japan) temperature control system, Xiaogan Wuyue(China) sensor and high quality speedometers respectively.
Pressure display	With melt pressure display
Feeder type	Vacuum feeder(with drier), with enganced screw feeder
Connection of die head with flange	By bolts
The advantages over other companies in this field	Good shearing, high output, reasonable design, high accuracy and easy control, high-grade materials and parts with steadfast performance.
1. Screw
Diameter	65mm
LD	25: 1
Quantity	1pcs
With gas vent or not	With
2. Barrel
Barrel type	Integer
Heating method	Air cooling unit. Special stainless cover and red copper electricity heater are used on the barrel
Heating zones	7-zone
Total heating power	60kw(approximate)
Temperature range	50~300
Cooling zones	7-zone
Cooling system	7X0.55kw
Cooling medium	Air cooling
Screw and barrel manufacturer	Zhejiang Machinery Co., Ltd
Quality guarantee	Testing block and tested report are available. Guaranteed period is more than 10, 000 working hours
Nitrid depth	0.6~0.7mm
3. Driving system and speed reducing system
Main driving motor power	18.5kw
Main motor working method	3-phase asynchronous motor, connected to the gearbox by couple
Main motor rotating speed
Gearbox type	Helical gear, hardened
Gears	Carburized and ground; The material is 20CrMoTi
Main motor speed-adjusting method	AC transducer
II. Haul-off unit
Haul-off speed	20-30m/min(adjustable)
Speed control method	Inverter
Motor power	0.75kwX2
III. Single disc winder
Winding range	15-25mm
IV. Mould	1 set

 

 

 

 

Certifications

 

Q1:What about the payment terms?

A1:Always 30% down payment as deposit,70% balance pay before shipping.

Q2:What about the payment way?
A2:TT,L/C at sight or Ali baba trade assurance.

Q3:If you can extend the guarantee time?
A3:Yes.Our guarantee time is 24 months.Double times of other factory because we have strong confidence for our product.

Q4:If you will send engineer coming to our factory to install and test the machines?
A4:Yes,Every set of machine we will send professional engineer to your factory and help installation and test the machines for you.

Q5:If you have CE,SGS,ISO certificate?
A5:Yes,except these,if you also need other certificates,we also can help to apply.

Q6:If we buy your machines, can you offer us wear-out spare pats?
A6:Yes,We provide our high quality machine 2 years' guarantee,and we will also offer you 2 years wear-out spare parts for free.
Once your machines broken or doesn't work within 2 years and you can't solve it, firstly, we will try to help you to find problems from your words description by phone or other communication tools. Secondly, if the phone solutions still not work, our engineers will go to your factory to solve it. Meanwhile, they will teach you the related experiences for fixing. 

Q7:The voltage,if you can design according to our request?
A7:Yes.

Any question,please call me. 
MOB&waspp: [phone]