waste PP PE BOPP Film/ woven bag/jumbo bag/fishing net double shaft shredder
1. PIC control
2. Multiple switch protected
3. Blade material Cr12MOV
Descripition of shredder double shaft for plastic
1.The shredder single shaft for plastic with big feeding mouth, it can put the big plastic or rubber product freely.
2.The rotary and cutting blade with edge of special design, it can get very high efficiency and high capacity.
3.The shredder single shaft for plastic is control by PLC system; the blade can rotate inopposite direction and close automatically if something unexpected happens; with very high safety service.
4.The shredder single shaft for plastic runs slowly with low noise and less dusty.
5.The blade material with special alloy steel made, with long life.
Advantages of shredder double shaft for plastic
1. The shredder single shaft for plastic can shred various bulk materials, basket materials, pipe, plate, sheet, tire, big roll film, which are difficult to be shredded by single shaft shredder.
2. The frame is combinational structures, made from precision machined extra-thick sheet, slewing axis is forced, Lange-angle, hexagonal prism, the hopper is large-caliber, and substantial, so good-sized material is practicable.
3. Revolving knife is designed and processed particular in thickness, shape, arrange order and so on.
4. PLC control system, forward and reverse operate and stop automatically can protect the machine when the materials is too big and much. Operate safely, low-speed running, low noise, little dust.
5. The knife is made from special alloy steel, sturdy and durable.
Main Parameter for single shaft shredder:
| Shredder Model |
SN-3063 |
SN-3980 |
SN-48100 |
SN-57120 |
| Dimension L/W/H(mm) |
3250×1750×2650 |
4150×2000×2750 |
4700×2550×2950 |
5350×2850×3060 |
| Cutting Chamber C/D(mm) |
1410×800 |
1410×1000 |
1410×1200 |
1410×1500 |
| Height of discharge port E(mm) |
500 |
500 |
500 |
560 |
| Cylinder Stroke(mm) |
900 |
900 |
900 |
900 |
| Rotor Diameter(mm) |
φ300.3 |
φ390.3 |
φ480.3 |
φ570.3 |
| Main Shaft Speed (r/min) |
74 |
74 |
74 |
74 |
| Screen Mesh(mm) |
φ40 |
φ40 |
φ40 |
φ40 |
| Rotor-knives(PCS) |
30 |
39 |
48 |
57 |
| Stator-knives(PCS) |
2 |
2 |
2 |
2 |
| Main Motor Power(KW) |
30 |
37 |
45 |
55 |
| Hydraulic Motor Power(KW) |
2.2 |
2.2 |
5.5 |
5.5 |
| Weight(KG) |
4500 |
7000 |
9500 |
11500 |
Main Parameter for double shaft shredder:
| Shredder Model |
SN-D800 |
SN-D1000 |
SN-D1200 |
SN-D1600 |
| Dimension L/W/H(mm) |
3200×1250×2350 |
3500×1250×2400 |
3750×1250×2450 |
4200×1650×2800 |
| Cutting Chamber C/D(mm) |
860×950 |
1060×1100 |
1260×1030 |
1660×1100 |
| Height of discharge port E(mm) |
500 |
500 |
500 |
560 |
| Cylinder Stroke(mm) |
900 |
900 |
900 |
900 |
| Rotor Diameter(mm) |
φ350.3*2 |
φ400.3*2 |
φ400.3*2 |
φ500.3*2 |
| Main Shaft Speed (r/min) |
74 |
74 |
74 |
74 |
| Screen Mesh(mm) |
φ40 |
φ40 |
φ40 |
φ40 |
| Rotor-knives(PCS) |
78 |
128 |
152 |
200 |
| Stator-knives(PCS) |
3 |
6 |
6 |
6 |
| Main Motor Power(KW) |
22*2 |
37*2 |
45*2 |
55*2 |
| Hydraulic Motor Power(KW) |
2.2 |
2.2 |
5.5 |
5.5 |
| Weight(KG) |
4000 |
6500 |
7500 |
8500 |
The V rotor, specially developed by SINO can be used universally and is made of solid material.Its aggressive material feed with up to two rows of knives guarantees high throughput with low power requirements.It can be equipped with hardened steel cutting knives in edge lengths of 30 mm and 40 mm.These can be turned over several times in case of wear which drastically reduces maintenance costs
The hopper fulfills several tasks at once.First the material to be shredded is fed through it-manually,mechanically or by conveyor belt The generous opening makes it easy to fill even very large parts. A decisive factor for shredding, however is its special design which is rounded at the front and thus effectively prevents material bridging Even with bulky parts,the shredder cuts itself free. If required, hopper extensions and lids with gas pressure springs are available
Manufacturer extends the motor portfolio for the most important world markets such as Europe,USA Canada China or Russia.It has the CE.UL.CSACCC,EACISI and UA certifications
The rotary shaft made by high quality carbon steel,anti-worn.
PLC electrical control
To ensure that the electronics are optimally matched to the machine. wedesign, build control cabinets by ourselves. We only use high-qualitycomponents.Intuitive touch interfaces quarantee quick adjustments.Functions such as setting the ram cycle or stop ensure a high throughpuThe built-in overload protection also prevents defects in the machine.
Blades
Two fixed blades are located by coupling and iron pins, protect reducer whileavoid power losss
The motor drives the cutter shaft to drive the cutter to rotate rapidly. Thematerial entering the cutting chamber is pushed by the feeder to themiddle of the moving cutter shaft and the fixed cutter. The blade on theshaft works with the fixed blade to cut and tear the material for shreddingThe blade is brought back to the crushing area to continue shredding.and the material with the discharge particle size falls from the mesh toachieve the purpose of shredding. The size of the blade and the size ofthe mesh are selected according to the user's requirements, and thescreen can be replaced according to the discharge particle size requirements
Q: Can we visit your factory?
Sure. We located in Zhangjiagang city which is very near Shanghai. For overseas customers, you can fly to Shanghai Pudong International Airport. We can pick you up in the Airport. (or Hongqiao International Airport. ) We also provide visit online by video.
Q: How can we get the exact price of plastic machine?
Contact us with the products size, shape, annual quantity and photo if possible. We can recommend our machine models with quotation.
Q: Do you provide any spare parts with machine?
Yes, we offer all necessary spare parts before shipment.(contact us for packing list )
Q: How about your after-sale service ?
We offer manual instruction and engineer training before loading,after shipment we provide 24 HRS online support, video technical support or field installation assist.
Q: What is the lead time?
For customized machine, it takes about 45-60 days after deposit. For stock machine, fast shipment. ( The actual production cycle will vary according to the degree of customization.)
Q: What is the warranty period for your machine ?
12 months warranty for components and technical support .
Q: Do you provide custom machines?
Most of our machines are customized. Our goal is efficiency and stable performance. We design the machines according to customers products to meet customer' needs.
Q: How can we install the machine when it arrives?
We can send experienced technicians to customer's country for guiding the installation and commission the machine, also train the customer's employees.
Q: What's the advantage of SINOTECH?
We provide customers with turnkey projects. Including plant design, plastic machine and mold installation, debugging, also we can source the auxiliary equipments for customers. We can ship the full set of machines after testing in our factory. It will save a lot of cost and time.
){kind=link}