Medical protective clothing is divided into Four specififications according to the shape and structure,
(S,M,L,XL)and the structure is one-piece type. Occupational protective clothing for medical staffff
in medical institutions. To prevent the transmission of virus from patients with air or liquid to medical
personnel and provide barri protection.
Product pictures
Product details
The product is made by cutting and sewing two layers of composite material. The two layers of composite material are
polyethylene membrane waterproof and breathable layer and non-woven fabric substrate. The face, cuffffs, ankles and waist of
the hat are made of rubber or rib fabric, and the front of the body is equipped with a closed tail self-locking zipper.
Production instruction
[product name] disposable medical protective clothing
[model and specification] s, m, l, XL
[structure composition] medica
l disposable protective clothing is made of composite non-woven material, which is composed of hat, coat and trousers.
[scope of application] to provide barrier and protection for patients' blood, body fluid, secretion, etc. contact ed by clinical medical staff at work.
[product performance] 1 appearance
1.1 the product shall be dry, clean and free of mildew, and the surface shall be free of adhesion, crack, hole and
other defects;
1.2 the heat sealing part shall be flat and sealed without bubbles;
1.3 the zipper of protective clothing shall not be exposed, and the pull head shall be self-locking.
2. The structure product is a one-piece structure, which should meet the requirements of Figure 1. It is easy to
wear and take off, and the joint part is tight. The elastic closure is adopted for the hat face, sleeve and foot.
Type 3 products shall meet the requirements of Table 1.
4 liquid barrier performance
4.1 when the water resistance hydrostatic pressure is 1.67kpa (17cm H2O), the protective clothing shall not leak.
4.2 the permeability shall not be less than 2500g / M2D.
4.3 the anti synthetic blood penetration shall not be lower than level 2 in Table 3 of gb19082-2009.
4.4 the surface moisture resistance shall not be lower than the requirements of class 3 in Table 3 of gb19082-
2009.
5. The breaking strength shall not be less than 45N.
6 the elongation at break shall not be less than 15%.
7. The filtration efficiency of protective clothing for non oil particles shall not be less than 70%.
8. The antistatic charge shall not be more than 0.6 μ C / piece.
9. The attenuation time of electrostatic attenuation performance shall not exceed 0.5s.
10 asepsis
10.1 class II products shall be sterilized with ethylene oxide and shall be sterile.
10.2 the ethylene oxide residue of the product shall not be more than 10 μ g / g.
Carton Meas:
Outer package size,
vacuumizing (non sterile) 60cm long * 40cm
wide * 42cm high
sterilization (outer package 1 layer of white
kraft paper plus 1 layer of PE film) 60cm
long * 40cm wide * 52cm high,
Inner packing bag 40 cm long * 30 cm wide
){kind=link}