| Customization: | Available |
|---|---|
| After-sales Service: | 12 Months |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Item. | Equipment Name | Model | QTY/set |
| 1.1 | Automatic loader | JLD30 | 1 |
| 1.2 | Hopper dryer | GZ116 | 1 |
| 1.3 | Rotary dehumidifier | VD-130H | 1 |
| 2. | Single screw extruder | SJ-45/28 | 1 |
| 3. | Vacuum calibration cooling table | ZDT-2000 | 1 |
| 4. | Synchronous crawler type Haul-off | TKC-800 | 1 |
| 5. | Precision Automatic cutting machine | SC-50T | 1 |
| 6.1 | PC Profile mold | - | 1 |
| 6.2 | Mold temperature controller | MK206S | 1 |
| Specification: | Length 90mm x width 45mm, Rectangular openings, whole is cooling water jacket design. |
| Cooling water jacket: | Water inlet/outlet with stop valve, flow adjustable. |
| Screw | |
| Diameter: | 45mm |
| L/D: | 28/1 |
| Base material of screw: | 38CrMoALA |
| Screw surface treatment: | Chromium plated after nitrogen treatment, thickness of nitrogen layer 0.5-0.6mm, surface hardness HV860-940. Thickness of chromium plated layer on screw surface - 0.03mm-0.04mm |
| Screw surface roughness: | ≤0.8um |
| Screw type: | Screw is designed for PC extrusion processing specially. |
| Screw connection: | Double keyway design. |
| Barrel | |
| Barrel material: | 38CrMoALA, inner surface with nitrogen treatment, thickness of nitrogen layer 0.55-0.66mm. |
| Inner surface hardness: | ≥HV950 |
| Inner surface roughness: | ≤0.8um |
| Filtering screen: | SUS304 |
| Heating sections: | 4sections Heater, 2.6KW heating power/section, precision casting aluminum heater, stainless steel protective casing outside, polishing treatment inside. |
| Cooling of barrel: | High efficiency noiseless fan, 180W x 4sets. |
| Barrel support: | One zone back from the output end of the barrel. |
| Melt pressure position: | Set melt pressure and temperature signal acquisition point on fixed flange. |
| Die connecter: | Page opening type flange -fasten by four bolts. |
| Driving motor | |
| Motor model: | AC variable-frequency motor, "SIEMENS-BEIDE" Brand QABP series, 15.0kW, 1500rpm. Motor with thermal overload protection, totally enclosed, fan-cooled. |
| Mounted type: | Motor mounted on a vertically adjustable base. |
| Gearbox | |
| Gearbox model: | Hard-toothed surface helical carburized gear reducer, model-146, speed ratio-20/1, rated power 22KW. Service life of thrust bearing meet 398000 hours under 5000 PSI (344 bar) head pressure and 75 RPM screw speed process state, Japan "NSK" brand. |
| Connection with motor: | Transmission through driving pulley, meet screw with the highest speed 75 RPM, pulley institutions with safety shield. |
| Gear cooling type: | Oil pump splashing cooling, compulsive lubrication. |
| Terminal box | |
| Mounted type: | Mounted on extruder base, include all wiring terminal of heaters, fans, links to power box wiring board. |
| Power type: | Main machine running with 380/3/50 power. |
| Electric cabinet | |
| Cabinet type: | Piano type cabinet, mounted on extruder side base, CE safety standard. |
| Control panel set: | Power handle switch, power indicator (red/green); Extruder motor start button switch, melt pump motor start button switch; Alarm switch and alarm lamp. |
| Thermocouple: | "K" type thermocouple+ high temperature-resistant lead wire. |
| Temperature control: | "OMRON" intelligent PID controller (total 8points) |
| Melt pressure: | Melt pressure and temperature digital display, with overpressure protection and alarming function. |
| Motor controller: | "TECO" GS510 series vector type inverter, 15.0KW/1set for extruder. |
| Air switch: | "LG" Brand, CE approved. |
| Contactor and breaker: | "SIEMENS" Brand, CE approved. |
| Safety protection: | CE standard (Ultra-low temperature alarm, over-current protection, overpressure alarm, motor overheating over |
Q1:What about the payment terms?
){kind=link}