Fully Automatic 30 Liters Jerry Can Blow Molding Machine

Product Description

Fully Automatic 30 Liters Jerry Can Blow Molding Machine

 

Feature

Machine Features

1. Special design for 10L~30L drum barrel jerrycan
2. Die head design with easy to got good quality parison
3. Latest mold changing system, much faster and easier.
4. Optimized hydraulic system, proportional pressure control
5. Adopts two pull-rod type closing-mold devices by rack and pinion system. The large setting platen is suitable for various sizes of molds
6. Simple structure in linear type, easy in installation and maintenance.
7. Servo control system to reduce the power
8. Hydraulic and electric hybrid power design, makes the machine run more speed and more energy-saving
9. Full Servo system control.
10. With a robot arm take out the finished product.
11. Accumulator die-head and Single station.
12. Austria Import Parison controller 100point-200point, Bottle quality easy control.
13. PID temperaure control system. Monitor temperature at all times
14. Low cost and easy maintance for bottle production and machine.


Pictures show

 

Product Parameters

 

Technical Specification		STD-30L Accumulator
		Extrusion Blow Molding Machine
Specifications		STD-30L
Max. Product Volume	L	30
Station		Single
Dry cycle	pc/h	360
Screw Diameter	mm	80
Screw L/D ratio	L/D	24
Screw drive power	KW	30
Screw heating power	KW	15.6
No.of heating zone(Screw)	ZONE	8
Output of HDPE	kg/h	120-140kg/h
Hydraulic pump driving power	KW	45
Clamping force	KN	200
Platen distance	mm	350~850
Max.Size of Mold	(W*H)mm	520*860
Capacity of Accumulator head	L	5
Max.Die diameter	mm	250
Die heating power	KW	22.8
Number of heating zone	ZONE	5
Blowing pressure	Mpa	0.8
Air consumption	M3/MIN	0.7
Cooling water pressure	Mpa	0.3
Water consumption	L/MIN	70
Size of machine	(L*W*H)m	4.8*3.4*4.0
Weight of machine	TON	12

Detailed Photos

Total Machine Control System

1.The control system is simple but humanized pages easy for operation.
2.100 point parison thickness controller & profile eddition.
3. Production technics and parameter saving for 20 moulds.
4. Professional engineer setting pages for problem diagnosis.
5.Short-cut key board & emergency stop for safety production.
6. Aluminum cantilever operation box and easy adjustment.
7. Remote technical support & program updating.

Die head system
1. Accumulator die head.
2. Temperature control: automatic temperature control module.
3. The max die pin of extrusion is 600mm.

Mould Platen
1. Latest Euro style toggle type clamping system.
2. Bigger platen size capable to carriage more bigger moulds.
3. Stronger clamping force can make the blow molding item bottle joint line finishing smoother.

Automatic Labor Arm
1. It is a necessary parts for blow molding machine to ensure the workers operation safe.
2. Labor saving, easy operation, high production efficiency.

Drum Mould
1. Reasonable cold water runner design for heat transmission.
2. Cutting blade length& flatness for scraps easy removing.
3. Parison over-flow groove depth equal to product weight.
4. Suitable water inlet& outlet position for easy production.
5. precise cold shrinkage calculation to insure filling volume.
6. Multi-functional selection for mould action requirements.

Blowing System
1. Bowing stand adapt to YUKEN, direction valve, using hydraylic drive.
2. Blow rod can optional equipped quick exhaust function.
3.Match non-contact induction switch, ensure accuracy of positioning.
4. Optional air rotating rod, in order to machining tntenal thread.
5. Optional equipped with widen guide rod(wait water cooling), widen the parison.

Extrusion System
1. Screw designed specially based on working quality of material. Diameter of screw: φ120mm, L/D30/1
2. Material of screw: High quality nitriding steel 38CrMoAlA, with nitriding surface HV≥800, brittleness≤2.
3. Material of barrel: High quality nitriding steel 38CrMoAlA, with nitriding surface HV ≥ 900, brittleness ≤2.
4. Drive mode:AC motor + Hard gear surface decelerator.
 

Air Cooling Fan
1. Air cooling fan guaranteed constant temperature for screw.

Gear Box
1. Frequency conversion speed regulation& Alloy steel hardened gear box.
2. Table speed regulation, energy saving, low noise, durable.

Hydraulic system
1. The main hydraulic system adopts to Japan YUKEN and SUMITOMO hydraulic valves and servo pump, precise pressure of proportion, flow control, quick actions, longer working life.
2. Hydraulic motor available to upgrade to servo drive energy saving, low noise& increase working life of hydraulic units.
 

Electric control system
1. Japan Mitsubishi PLC system, with Mitsubishi temperature control module.
2. Weinview Touch Screen to easily set and change communication, parameter, image display with
self-diagnose.
3. Japan Mitsubishi inverter provide stable and efficient extruding process.
4. Other main electrical components are from wolrd-famous brands such as OMRON, LG and etc.

 

Workshop Production

 

Packaging & Shipping

Certifications

 

FAQ

FAQ:
Q: Can we visit your factory?

Sure. We located in Zhangjiagang city which is very near Shanghai. For overseas customers, you can fly to Shanghai Pudong International Airport. We can pick you up in the Airport. (or Hongqiao International Airport. ) We also provide visit online by video.

Q: How can we get the exact price of plastic machine?
Contact us with the products size, shape, annual quantity and photo if possible. We can recommend our machine models with quotation.

Q: Do you provide any spare parts with machine?
Yes, we offer all necessary spare parts before shipment.(contact us for packing list )

Q: How about your after-sale service ?
We offer manual instruction and engineer training before loading,after shipment we provide 24 HRS online support, video technical support or field installation assist.

Q: What is the lead time?
For customized machine, it takes about 45-60 days after deposit. For stock machine, fast shipment. ( The actual production cycle will vary according to the degree of customization.)

Q: What is the warranty period for your machine ?
12 months warranty for components and technical support .

Q: Do you provide custom machines?
Most of our machines are customized. Our goal is efficiency and stable performance. We design the machines according to customers products to meet customer' needs.

Q: How can we install the machine when it arrives?
We can send experienced technicians to customer's country for guiding the installation and commission the machine, also train the customer's employees.

Q: What's the advantage of SINOTECH?
We provide customers with turnkey projects. Including plant design, plastic machine and mold installation, debugging, also we can source the auxiliary equipments for customers. We can ship the full set of machines after testing in our factory. It will save a lot of cost and time.