Automatic Blow Molding Machine/PET water bottle Blow Moulding Machine
SINOTECH SPET series Automatic Blow Molding Machine is a high-speed linear blow molding machine developed by SINOTECH Machine using the international advanced bottle technology. It uses high pressure compressed gas to blow PET preforms into a type. This machine needs to use a preform suitable for the blown bottle type. The series of fully automatic rotary blow molding machines can be used to independently blow the bottle or to blow the bottle in front of the filling line. It can also be used for blowing the bottle in the blow-drying machine. Standard cavity (bottle volume 0.25-20L) rotary blow molding machine, used in the production of PET bottles of various beverages, the production capacity can reach 58500 bottles / hour.
1. Stable performance with advanced PLC.
2. Conveying preforms automatically with conveyor.
3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area and eternal temperature in the preheater with an automatic thermostatic apparatus.
5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8. Strong clamping force with high pressure and double crank links to lock the mold.
9. Two ways of operating: Automatic and manual.
10. Safe, reliable and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
12. Contamination is avoided for the bottle body.
13. Ideal effect of the chilling with the chilling system.
14. Easy installation and starting.
15. Low rejection rate: Less than 0.2 percent.
Product Parameters
| ITEM |
FA20L-1 |
Bottle type specification
|
Cavity |
1 |
| Max.volume |
20L |
| Bottle mouth maximum overall diameter |
38-70mm |
| Bottle biggest diameter |
350mm |
| Bottle maximum height |
550mm |
| Power specification |
Light tube quantity |
48pcs |
| Light tube power |
1.5KW |
| Maximum heating power |
72KW |
| All electric machine installation |
79KW |
| Actual consumption |
30%--60% |
Air pressure specification
|
Work pressure |
5-6kg/cm2 |
| Blow bottle pressure |
25-45kg/cm2 |
| Higher -pressure gas consumption |
2000~3000Ltr/min |
| Water cooling specification |
Work pressure |
5-6 kg/cm2 |
| Temperature range |
10ºC |
| Consumption |
12000kcal/hr |
| Forzen water flow |
88L/min |
| Machine specification |
Machine size |
5.2*2.0*2.0 |
| Machine weight |
4.6ton |
| Name |
Supplier |
| Microcomputer Control System |
MITSUBISHI PLC, Japan |
| Touch Screen |
HITECH, Taiwan |
| Contactor |
SCHNEIDER, France |
| Air Switch |
SCHNEIDER, France |
| Motor |
SIMENS BEIDE, Germany |
| Power Resource |
MEAN WELL, Taiwan |
| Inverter |
MITSUBISHI, Japan |
| Relay |
OMRON, Japan |
Detailed Photos
01 LCD-Touch Screen
Easy operation and control
02 AirTac Pneumatic valves
Equipped with Pre-blow, easy installation
03 Built-in low pressure converter
No need low pressure air compressor. Help customers save investment costs.
04 Heating Oven(Infrared heating tube)
Preforms heating by Linear Lamp heating before bottle blowing.
05 Mould of Bottle
#45 steel with good quality of CNC manufacture,
Customize by your request, Equip with Air cooling or Chiller
Parts Picture
01 Control System
High response, image high-quality control system, specially support simple USB program upgrade, providing strong guarantee for equipment upgrade, trouble shooting.
XINJE PLC, generalized programming language, program update, convenient update, free maintenance, high precision, fast response.
02 Pneumatic System
The servo motor use AirTAC cylinder.
Low-pressure control systems match, respectively assimilating and using the professional advantage of these
top brands, making the machine work more faster and improve response speed.
High-pressure blowing control system, diameter is large, fast response speed.
03 Sensor System
High quality imported sensor & switch system including proximity switch, photoelectric switch, and electronic magnet switch to
keep production process going step by step and avoid any possible damage on machine.
04 Heating System
SPET automatic stretch blow molding machine adopts infrared type heating mode, whose superior thermal-radiation and thermal penetrability provide machine with powerful heating to meet strict preform heating requirement under speedy moving.
Cooling bottle neck avoid bottle neck deformation
05 Clamping System
SPET adopts four-plate type toggle clamping unit to provide powerful clamping force and increase the clamping speed. Apart from the four-plate type toggle clamping unit, there is a high pressure assistant clamping device that is special designed to get a firm clamping.
06 Servo Motor
1. Precision, speed and torque of the closed loop control;Overcome the problem of step motor.
2. Rotational speed, high speed performance is good, generally rated speed can reach 2000 ~ 12000 RPM;
3. Stability, low speed running smoothly, won't produce similar to the stepper motor during low speed running step run phenomenon.Suitable for high speed response to the requirements of the occasion;
4. Timeliness: motor deceleration dynamic response time is short, usually within a few milliseconds;
SPET fully automatic pet bottle machine.
Bar distance and circuitous type pre-form carrier systems, energy saving 30%
Production Process
Company Profile
Certifications
Packaging & Shipping
FAQ
Q1:What about the payment terms?
A1:Always 30% down payment as deposit,70% balance pay before shipping.
Q2:What about the payment way?
A2:TT,L/C at sight or Alibaba trade assurance.
Q3:If you can extend the guarantee time?
A3:Yes.Our guarantee time is 24 months.Double times of other factory because we have strong confidence for our product.
Q4:If you will send engineer coming to our factory to install and test the machines?
A4:Yes,Every set of machine we will send professional engineer to your factory and help installation and test the machines for you.
Q5:If you have CE,SGS,ISO certificate?
A5:Yes,except these,if you also need other certificates,we also can help to apply.
Q6:If we buy your machines, can you offer us wear-out spare pats?
A6:Yes,We provide our high quality machine 2 years' guarantee,and we will also offer you 2 years wear-out spare parts for free. Once your machines broken or doesn't work within 2 years and you can't solve it, firstly, we will try to help you to find problems from your words description by phone or other communication tools. Secondly, if the phone solutions still not work, our engineers will go to your factory to solve it. Meanwhile, they will teach you the related experiences for fixing.
Q7:The voltage,if you can design according to our request?
A7:Yes.
Q8:If you support Alibaba trade assurance pay?
A8:Yes.100% support.
){kind=link}