| Customization: | Available |
|---|---|
| After-sales Service: | 12 Months |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
STISB-650PC series automatic high speed injection-blowing hollow molding machines are especially suitable for blowing and moulding PC 5gallon pure water bucket raw material with a production capacity of 70 molds/hour (empty cycle).
Main Features
*The whole process including mould injection stretch blowing and off-molding can be finished within one step,which means more energy efficiency and high quality for product.The injection blowing molding products are thinner and better uniformity than old style ones,which can save 50% materials.Meanwhile hyaienic reguirement is guaranteed.
*Compact structure cover small floor coverage which can save more cost than traditional machines.
*Widely used for manufacturing bottles for pharmaceutical healthcare,food beverages cosmetics lamp shade and other applications.
*Can use recycling material with the lowest cost
| Technical Specification | Unit | STISB-650PC series |
| Maximum product volume | L | 18.9 (Based on the shape of the product) |
| Extrusion system | ||
| Screw diameter | mm | 75 |
| Screw length to diameter ratio | 22:1 | |
| Screw speed | rev/min | 10~80 |
| Plasticizing ability | kg / h | 80 |
| Number of heating sections of barrel | 4 | |
| Barrel heating power | KW | 20 |
| Clamping device | ||
| Effective plane size of template | mm | 860 x 610 (width*height) |
| Template spacing | mm | 250~800 |
| Clamping force | KN | 650 |
| Hydraulic system | ||
| Servo pump power | KW | 45WL*3 |
| Air pressure | Mpa | 1.2 |
| Work pressure | Mpa | 10 |
| Air consumption | m³/min | 0.8 |
| Electrical control system | ||
| Water supply pressure | Mpa | 0.3-0.5 |
| Voltage | V | AC380V±10% |
| Frequency | HZ | 50 |
| Wire system | Three-phase four-wire system | |
| Total rated power | KW | 120 |
| Average energy consumption | KW/h | 50 |
| Machine weight | ton | 20 |
Extrusion system:this system adopts imported automatic temperature control device, screw hydraulic motor drive + double cylinder injection mode.
Clamping device:the hydraulic fixed type non pull rod mold opening and closing mechanism has the advantages of fast speed, convenient demoulding and good stability
Hydraulic system:the whole hydraulic system adopts imported components and full servo flow control.
Electronic control system:this system adopts Japanese programmable controller, all adopts world famous brand electrical components
Remove molding disadvantage factor, least molding step
| Molding | Process | Structure | Manpower/Energy/Space | Product Quality |
| One-step | From preform to product | One machine | Little | Not affect by damp and less pollution; Various kinds of shape √ |
| Two-step | Injection and blow molding are two separated process |
1.Injection molding machine 2.Preform transiting machine 3.Reheating, stretch and off-moulding machine |
More |
Easy affect by damp and polluted; Singleness shape ×
|
FAQ
Q: Can we visit your factory?
Sure. We located in Zhangjiagang city which is very near Shanghai. For overseas customers, you can fly to Shanghai Pudong International Airport. We can pick you up in the Airport. (or Hongqiao International Airport. ) We also provide visit online by video.
){kind=link}