Pet Bottles Blowing Machine

Product Description

Pet Bottles Blowing Machine

Specifications
Pet Bottle Blowing Machine; Max. 2L, 3000PCS/h
Welcome you to visit our website to find more
Blow Moulding Machine
Bottle Blow Moulding Machine
Pet Blow Moulding Machine
STB series pet stretch blow molding machine is the most stable two-step linear blow moulding machine. 2L, 3000PCS/h
A. Brief Introduction
STB-L series are the most stable two-step fully-automatic pet stretch-blow moulding machines(reheat). It has one to six cavities and the maximum capacity of the products is 2L. It can blow bottles in shapes: Carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
1). High Automatization
2). High Intelligence: The machine can be controlled through touch screen and running status is shown on it.
3). High Quanlity: Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4). High Speed: 2000BPH(2-cavity), 3000BPH(3-cavity), 4000BPH(4-cavity), 6000BPH(6-cavity).
5). No Contamination: Closed production zone, good self-lubrication system avoid contamination.
6). Low Cost: Low consumption of electricity, air and water.
7). High Transparency: Easy maintenance, absolute safely, visual inspection, low noise.

B. Settings:
A). PLC colour display: Siemens(Germany)
B). Pneumatic parts: FES TO(Germany)
C). Controller of preform transfer: Servo motor National(Japan)
D). Other electric parts are all world-famous brand

C. Machine Features:
C. 1. Stable performance with advanced PLC.
C. 2. Conveying preforms automatically with conveyor.
C. 3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
C. 4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
C. 5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
C. 6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
C. 7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
C. 8. Strong clamping force with high pressure and double crank links to lock the mold.
C. 9. Two ways of operating: Automatic and manual.
C. 10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
C. 11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
C. 12. Contamination is avoided for the bottle body.
C. 13. Ideal effect of the chilling with the chilling system.
C. 14. Easy installation and starting
C. 15. Low rejection rate: Less than 0.2 percent.

ITEM	STB-L2	STB-L3	STB-L4	STB-L6
Theoretical output	2000	3000	4000	6000
Max.container volume	1.25L	2L	1.25L	0.7L
Max.neck diameter	38MM	38MM	38MM	38MM
Max.container diameter	80MM	105MM	80MM	60MM
Max.container height	320MM	335MM	320MM	265MM
Number of cavity	2	3	4	6
Number of lamp	28	100	70	60
Max.heating power	42KW	100KW	84KW	90KW
Installation power	50KW	110KW	95KW	100KW
Actual power consumption	35KW	45KW	40KW	50KW
Operatating low pressure	0.7Mpa	0.7Mpa	0.7Mpa	0.7Mpa
Low pressure consuming	1400L/min	2000L/min	2000L/min	2000L/min
Blowing pressure	3.5Mpa	3.5Mpa	3.5Mpa	3.5Mpa
High pressure consuming	3500L/min	5500L/min	5000L/min	4500L/min
Operating pressure	0.3-0.5Mpa	0.3-0.5Mpa	0.3-0.5Mpa	0.3-0.5Mpa
Temperatuer	10	10	10	10
Flow rater	30 L/min	40 L/min	40 L/min	50L/min
Machine dimension	2.7×1.8×2.2	3.5×2×2.2	4×2×2.2	4.9×2.15×2.2
Machine weight	3500Kg	4200Kg	4800Kg	5000Kg

 

Company Profile

Certifications

FAQ

Q: How about your after-sale service ? 
We offer manual instruction and engineer training before loading,after shipment we provide 24 HRS online support, video technical support or field installation assist.

Q: What is the lead time?
For customized machine, it takes about 45-60 days after deposit. For stock machine, fast shipment. ( The actual production cycle will vary according to the degree of customization.)

Q: What is the warranty period for your machine ?
12 months warranty for components and technical support .

Q: Do you provide custom machines?
Most of our machines are customized. Our goal is efficiency and stable performance. We design the machines according to customers products to meet customer's needs.

Q: How can we install the machine when it arrives?
We can send experienced technicians to customer's country for guiding the installation and commission the machine, also train the customer's employees.

Q: What's the advantage of SINOTECH?
We provide customers with turnkey projects. Including plant design, plastic machine and mold installation, debugging, also we can source the auxiliary equipments for customers. We can ship the full set of machines after testing in our factory. It will save a lot of cost an