Inline Flat Emitter Drip Irrigation Tape Extrusion Line
Product information
This flat dipper irrigation tape production line is our new generation of high-speed thin-wall drip irrigation tape production line. it's used to produce flat type drip irrigation tapes, which are widely used to grow field crops (such as cotton), fruits, vegetables.trees, flowers and more.
| |
Item |
|
| 1 |
Tape Diameter |
φ12mm,φ16mm,φ20mm |
| 2 |
Tape Thickness |
0.2~0.9mm |
| 3 |
Design Production Speed |
200m/min |
| 4 |
Central Line Height |
1000mm |
| 5 |
Machine Direction |
From right to left |
| 6 |
Irrigation Product |
Horticultural crops |
(1) Drip irrigation tape is the core of drip irrigation system. It is suitable for planting crops in fields, greenhouses and greenhouses. It can save water and fertilizer and improve economic benefits.
(2) At present, drip irrigation is the most commonly used water-saving irrigation method in arid and water shortage areas. Drip irrigation technology can make water utilization rate reach 95%.
(3) Drip irrigation belt is widely used in the places lack of water. Water saving and grain increasing is an important measure to improve the yield of food crops, and drip irrigation technology plays an important role in food production.
(4) The working principle of drip irrigation technology is to use the low-pressure pipeline system to transport water directly to the field, and then through the emitter, orifice or drip irrigation belt installed on the capillary, the water drops evenly and slowly into the soil near the crop root zone, so that the soil in the most developed area of the crop root system often maintains the appropriate humidity and makes the soil water, fertilizer, gas, heat and microorganism live In order to create favorable conditions for high and stable yield of crops.
(5) The water for drip irrigation is stabilized, filtered and fertilized by the first filtration system, then passed through the main pipe and branch pipe, and finally dropped to the plant root through the drip irrigation belt. In a word, drip irrigation is suitable for crops in water shortage area.
1. Control System
Advanced Siemens PCC control system was applied into this Flat drip irrigation tape line.Intelligent functions of this system, such as whole line sync control without any deviation. One touch speed increasing or decreasing control,high precision temperature control etc,can ensure the reliable and convenient operation of the line.
2. Gravimeter System
High precise control system of pipe weight per meter is applied in this flat drip irrigation tape line. Such device will feed material precisely according to the weight per meter and line speed changing; to get a precise gram weight control of produced pipe. Which can shorten the start-up time and save raw materials.
3. Dripper sorting system
Most advanced detecting technologies are applied,such as nanoscale laser identifying device and dripper anti-direction rejecting device, ensuring drippers in production are 100% qualified.
Dripper Sorting Speed:1100pcs/min
4. Haul-off machine
The two-stages haul-off machine of this drip irrigation pipe machine adopted servo control, and the haul-off speed can be synchronously adjusted according to the production requirement, with stable and reliable pulling, low noise.
5. Punching machine
This drip irrigation pipe machine is equipped with online blind-hole detecting system, once the system detects the not-punched pipe, it will cut off the pipe automatically, meanwhile change over the coiling work position, and report the waste pipe conditions on time.
6. Automatic Winding Machine
Automatic winding machine is driven by servo motor and controlled by SIEMENS PLC system.
Application of servo traversing and tension control system in this flat drip irrigation tape line, can ensure the high sync condition of winding speed and line speed, making winded coils even and neat. During production, the winder can cut pipes and change reels automatically according to the setting length.
1. Automatic emitter screening and identification devices 2.Punching machine
3. Vacuum calibration tank 4. Haul-off machine
Q: Can we visit your factory?
Sure. We located in Zhangjiagang city which is very near Shanghai. For overseas customers, you can fly to Shanghai Pudong International Airport. We can pick you up in the Airport. (or Hongqiao International Airport. ) We also provide visit online by video.
Q: How can we get the exact price of plastic machine?
Contact us with the products size, shape, annual quantity and photo if possible. We can recommend our machine models with quotation.
Q: Do you provide any spare parts with machine?
Yes, we offer all necessary spare parts before shipment.(contact us for packing list )
Q: How about your after-sale service ?
We offer manual instruction and engineer training before loading,after shipment we provide 24 HRS online support, video technical support or field installation assist.
Q: What is the lead time?
For customized machine, it takes about 45-60 days after deposit. For stock machine, fast shipment. ( The actual production cycle will vary according to the degree of customization.)
Q: What is the warranty period for your machine ?
12 months warranty for components and technical support .
Q: Do you provide custom machines?
Most of our machines are customized. Our goal is efficiency and stable performance. We design the machines according to customers products to meet customer' needs.
Q: How can we install the machine when it arrives?
We can send experienced technicians to customer's country for guiding the installation and commission the machine, also train the customer's employees.
Q: What's the advantage of SINOTECH?
We provide customers with turnkey projects. Including plant design, plastic machine and mold installation, debugging, also we can source the auxiliary equipments for customers. We can ship the full set of machines after testing in our factory. It will save a lot of cost and time.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}