LDPE blow extrusion machine/HDPE blow extrusion machine
Automatic HDPE Accumulative extrusion Blow Molding Machine Plastic extrusion blow molding machine can produce diffferent kinds of plastic product like bottle container, tank, jerry can drum tool box. For different product with different model machine.
Professional Manufacture of Blow Molding Machine
Maximum Volume: 5 litter
Material: HDPE, PP, PVC, PETG etc.
View Stripe matchable
Easy operation
Automatically
1>Double station and single satation
2>Single mould head to six mould head
3>Mutli-layer with View Strip line
4> It can match auto-deflashing device, Leak detector, Chiller and crusher recycle system.
5> The daliy output(24 hours) can reach approximately from 5, 000 to 86, 000; It can produce from 0.2-5L plastic hollow bottle products.
A. Brief Introduction
DMK-L series are fully-automatic pet stretch-blow molding machines(preheat). It has 3 to 16 cavities and the maximum capacity of the products is 2000mL. It can blow bottles in shapes: Carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
1). High Automatization
2). High Intelligence: The machine can be controlled through touch screen and running status is shown on it.
3). High Quanlity: Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4). High Speed: 6000BPH(6-cavity), 8000BPH(8-cavity), 12000BPH(12-cavity), 16000BPH(16-cavity).
5). No Contamination: Closed production zone, good self-lubrication system avoid contamination.
6). Low Cost: Low consumption of electricity, air and water.
7). High Transparency: Easy maintenance, absolute safely, visual inspection, low noise.
B. Settings:
A). PLC colour display: SIEMENS(GERMANY)
B). Pneumatic parts: FESTO(GERMANY)
C). Controller of preform transfer: Servo motor National(JAPAN)
D). Other electric parts are all world-famous brand
C. Machine Features:
C. 1. Stable performance with advanced PLC.
C. 2. Conveying preforms automatically with conveyor.
C. 3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
C. 4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
C. 5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
C. 6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
C. 7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
C. 8. Strong clamping force with high pressure and double crank links to lock the mold.
C. 9. Two ways of operating: Automatic and manual.
C. 10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
C. 11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
C. 12. Contamination is avoided for the bottle body.
C. 13. Ideal effect of the chilling with the chilling system.
C. 14. Easy installation and starting
C. 15. Low rejection rate: Less than 0.2 percent.
Basic
parameter |
Material |
PE.PP... |
|
| Max.product volume |
5L |
| Cycle time |
300pcs |
| Measurement |
LXWXH=3.5x2.2x2.8 (meter) |
| Weight |
6T |
| General power |
33.9KW |
Average power
consumption |
22KW/H (The is the exactly power consumption) |
Plasticizing
system |
Specification |
extrusion system can be applicable to various of raw material, plasticizing capability is good and output is high,transducer adjust speed,collect temperature-control signals and prevent the screw from cold starting |
|
| Speed reducer |
hard-teeth, low noise and wear-resistant speed reducer |
Machine barrel
screw |
Ø70mm,L/D=24, 38CrMoALA high quality nitriding steel |
| Plasticizing |
85Kg/H(HDPE) |
| Heating zone |
4 zone |
| Heating power |
16KW/H |
Extrude motor
power |
three phase a synchronism(380V.50HZ)
|
| cooling fanner |
4 zone power:85W |
Extrusion
system |
Specification |
Patented central material feeding mold head that is quick in changing colors |
| Die head |
40Cr high quality nitriding steel |
| Structure of die head |
Shan Tou |
| Mold center distance |
-- |
Max diameter of
die heat |
Ø145mm |
| Heating zone |
4 zone |
| Heating power |
16KW |
Opening
and
clamping
mold |
Specification |
Gear wheel and rack in-phase aim at twin shaft clamping device and cylinder |
| clamping force |
105KN |
| Distance of mold platen |
188-538mm |
| mold platen dimension |
WXH:338x450mm |
| Max mold dimension |
WXHX:450x500 |
| mold fix mode |
bolt compaction |
Electric
control system |
Specification |
PLC.colo.touch screen,standardization blowing shaping machine control system (MITSUBISHI programmable controller) |
|
| human-machine |
color touch screen,trouble auto alarm, diagnose the system |
| Temperature control |
self-regulation |
Temperature
control |
adopt Japanese Mitsubishi PLC control system |
| protection function |
Automatic alert and breakdown feedback double protection of mechanical apparatus |
Hydraulic
system |
Specification |
proportion pressure controller changing direction quickly and softly |
| human-machine electromotor |
three phase a synchronism (380V,50HZ),11KW |
| Hydraulic pump |
adopt double-lamina pump |
| Hydraulic valve |
imported hydraulic components |
| Vitta |
high pressureVitta |
| system pressure |
60Kg/cm² |
| cooling mode |
Water-cooled |
Pneumatic
system |
Specification |
imported and famous brand pneumatic pressure |
| Air pressure |
0.6Mpa |
| Air |
0.7M 3 /min |
| Valve |
FESTO |
Cooling
system |
Specification |
mold,barrel,oil box adopt independentcooling waterway |
| cooling medium |
water |
| Water flux |
60L/min |
| Water pressure |
0.3MPa |
Any question,please call me.
MOB&waspp: +8613773240086
){kind=link}