| Customization: | Available |
|---|---|
| Warranty: | 12 Months |
| Type: | Extrusion Blow Molding Machine |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Item | Code Item | Standard Code | Manual |
| Extruder (Main extruder) |
Max. Capacity | 250L | |
| Main screw | φ120mm | Screw type: Mutations isolated mixing energy saving screwBarrel type: IKV forced feeding structure |
|
| Screw L/D | 32: 1 | ||
| Screw material | 38CrMoALA | ||
| Max. Extruder consumption | 360Kg/Hr. | Take HMWHDPE for example, change with material density |
|
| Twisting transition method | Electrical machinery, Gear box, Leather belt transmission | Hard gear surface decelerator | |
| Driving motor | 132KW | ||
| Screw rotate speed | 5---60r/min | ||
| Ahead/back adjusting | Yes | ||
| Up/down adjusting | Yes | ||
| Heating mode | Ceramic heating ring, temperature control precision ±1% |
||
| Temperature control zone | 5 | Japan MTSUBISHI | |
| Heating power | 40KW | ||
| Cooling for blower | 5 | ||
| Cooling function | Yes | Cooling water | |
| Clamping unit (Mold opening/closing unit) | Structure | With patented TONGDA two-bar timing clamping structure in high speed and high force, to achieve quality products. |
|
| Clamping directions | Ball rail | For high precise location for longer service life. | |
| Clamping speed | 250mm/sce; 15m/min |
||
| Platen dimension | 1320*1650 mm | (W*H) | |
| Max. Mold dimension | 1100*1720 mm | (W*H) | |
| Mold opening stroke | 1000 mm | ||
| Platen distance | 800~1800 mm | Min.~Max. | |
| Clamping force | 770 KN | ||
| Mould thickness scope | 810~1000 mm | ||
| Fixing pattern of mold | Mold press platen | ||
| Mold opening/closing stroke control | Inducing Switch+moving | Discriminate mold opening/ closing end, mold opening/ closing slow speed, |
|
| Light Electric Safety protect |
Taiwan FOTEK | ||
| Die head | Form | Accumulator | First in, first out |
| Material | 38CrMoALA, inner mirror treatment | ||
| Accumulator volume | 22L | ||
| Output of injecting | 16.5Kg | HDPE, density: 0.75g/cm3 | |
| Die dimension size | φ120~ 620mm | Min.~Max. | |
| Heating method | Stainless steel heating ring, precision + 1% | ||
| Temperature control zone | 6 | ||
| Blow-air | Yes | ||
| Adjusting of parison thickness | Yes | MOOG 100-point | |
| Injecting stroke control | Accumulator electronic ruler + limit switch | ||
| Adjusting method of thickness | Inner mold adjusting | ||
| Adjusting output at axial direction | + 5mm | ||
| Injecting pressure | 75~140mm | TONGDA 10-point pressure adjusting control | |
| Max. Injecting speed | 1.6kg/sec | ||
| Top blowing | Blow-air control method | Discriminate high/low blow-air | |
| Side blowing | Blow-air control method | Discriminate high/low blow-air | |
| Bottom blowing | Blow pin stroke control | Inducing switch | Discriminate blow pin up/down end |
| Blow-air control method | Discriminate high/low blow-air | ||
| Blow pin cooling function | Cooling water | 1-in 1-out cooling system | |
| Blow pin supporting material | Yes | Changeable | |
| Adjusting of blow pin position | Ahead/back, left/right, up/down adjusting | ||
| Mechanical hand | Running method | Germany FE STO | |
| Direction control | Ball rail | High precise and speed | |
| Electric system | Temperature control | MITUSBISH | MITUSBISH, PID control |
| Load protection | |||
| Movement control | MITUSBISH PLC | ||
| Operation interface | Human-machine interface | Taiwan HITECH | |
| Time setting | Touch screen | ||
| Oil pressure system | Main motor | 22KW | Split flow pump & energy accumulator |
| Main oil pump | American DENISON | ||
| Movement control method | Proportion pressure control | 0~999 | |
| Direction control | Japan YUKEN hydraulic direction control valve | ||
| Max. Pressure | 160kg/cm2 | ||
| Air pressure system | Direction control | Taiwan AIRTEC | |
| Pressure control | Separated | ||
| Max. Pressure | 8kg/cm, 1.6m3/min | All air pipes are connected by PU pipe | |
| Other material | Lubrication way | Butter | |
| Oil pressure cooling | Cooling effect is achieved by oil pressure cooling | ||
| Mold cooling | Separated cooling water resource, use 5-in 5-out fix (single side) | ||
| Gear box, hopper place, die dimension cooling | Use separated cooling water circuit, insure cooling effect |
||
| Servo pump | Variable-volume pump | ||
| Power of servo pump motor | 11KW | ||
| Installed capacity | 230KW | ||
| Average energy consumption | 120KW | ||
| Overall dimension | L*W*H | 8000*2900*5500(mm) | |
| Weight | 38TON |
Q: How about your after-sale service ?
We offer manual instruction and engineer training before loading,after shipment we provide 24 HRS online support, video technical support or field installation assist.
Q: What is the lead time?
For customized machine, it takes about 45-60 days after deposit. For stock machine, fast shipment. ( The actual production cycle will vary according to the degree of customization.)
Q: What is the warranty period for your machine ?
12 months warranty for components and technical support .
Q: Do you provide custom machines?
Most of our machines are customized. Our goal is efficiency and stable performance. We design the machines according to customers products to meet customer's needs.
Q: How can we install the machine when it arrives?
We can send experienced technicians to customer's country for guiding the installation and commission the machine, also train the customer's employees.
Q: What's the advantage of SINOTECH?
We provide customers with turnkey projects. Including plant design, plastic machine and mold installation, debugging, also we can source the auxiliary equipments for customers. We can ship the full set of machines after testing in our factory. It will save a lot of cost and time.
){kind=link}