| Customization: | Available |
|---|---|
| Warranty: | 12 Months |
| Type: | Extrusion Blow Molding Machine |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
25L jerry can plastic blow molding machine
Model: BSM80N-30L accumulation extrusion blow molding machine
Product possible: Plastic jerry cans, bottles, pots, toys and kettles etc.
Max. product volume: 30L
Plastic material: HDPE, LDPE, PP, PVC, EVA
Head No.: single
Auxiliary equipments: blow mould, mixer, vacuum auto-loader, mixer, dryer, crusher, water & fans chiller, air compressor, conveyor system for deflashing parts, conveyor system for finished product delivery, leakage tester…
| Basic parameter |
Material | PE.PP... | |||
| Max.product volume | 50L | ||||
| Cycle time | 300pcs | ||||
| Measurement | LXWXH=3.5x2.2x2.8 (meter) | ||||
| Weight | 6T | ||||
| General power | 33.9KW | ||||
| Average power consumption |
22KW/H (The is the exactly power consumption) | ||||
| Plasticizing system |
Specification | extrusion system can be applicable to various of raw material, plasticizing capability is good and output is high,transducer adjust speed,collect temperature-control signals and prevent the screw from cold starting | |||
| Speed reducer | hard-teeth, low noise and wear-resistant speed reducer | ||||
| Machine barrel screw |
Ø70mm,L/D=24, 38CrMoALA high quality nitriding steel | ||||
| Plasticizing | 85Kg/H(HDPE) | ||||
| Heating zone | 4 zone | ||||
| Heating power | 16KW/H | ||||
| Extrude motor power |
three phase a synchronism(380V.50HZ) |
||||
| cooling fanner | 4 zone power:85W | ||||
| Extrusion system |
Specification | Patented central material feeding mold head that is quick in changing colors | |||
| Die head | 40Cr high quality nitriding steel | ||||
| Structure of die head | Shan Tou | ||||
| Mold center distance | -- | ||||
| Max diameter of die heat |
Ø145mm | ||||
| Heating zone | 4 zone | ||||
| Heating power | 16KW | ||||
| Opening and clamping mold |
Specification | Gear wheel and rack in-phase aim at twin shaft clamping device and cylinder | |||
| clamping force | 105KN | ||||
| Distance of mold platen | 188-538mm | ||||
| mold platen dimension | WXH:338x450mm | ||||
| Max mold dimension | WXHX:450x500 | ||||
| mold fix mode | bolt compaction | ||||
| Electric control system |
Specification | PLC.colo.touch screen,standardization blowing shaping machine control system (MITSUBISHI programmable controller) | |||
| human-machine | color touch screen,trouble auto alarm, diagnose the system | ||||
| Temperature control | self-regulation | ||||
| Temperature control |
adopt Japanese Mitsubishi PLC control system | ||||
| protection function | Automatic alert and breakdown feedback double protection of mechanical apparatus | ||||
| Hydraulic system |
Specification | proportion pressure controller changing direction quickly and softly | |||
| human-machine electromotor | three phase a synchronism (380V,50HZ),11KW | ||||
| Hydraulic pump | adopt double-lamina pump | ||||
| Hydraulic valve | imported hydraulic components | ||||
| Vitta | high pressureVitta | ||||
| system pressure | 60Kg/cm² | ||||
| cooling mode | Water-cooled | ||||
| Pneumatic system |
Specification | imported and famous brand pneumatic pressure | |||
| Air pressure | 0.6Mpa | ||||
| Air | 0.7M 3 /min | ||||
| Valve | FESTO | ||||
| Cooling system |
Specification | mold,barrel,oil box adopt independentcooling waterway | |||
| cooling medium | water | ||||
| Water flux | 60L/min | ||||
| Water pressure | 0.3MPa | ||||
){kind=link}