| Customization: | Available |
|---|---|
| Warranty: | 12 Month |
| Type: | Extrusion Blow Molding Machine |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Extruder | |||
| 1 | Screw Diameter | 135mm(polymer special screw has no temperature rise ) | |
| 2 | L/D | 30:1 | |
| 3 | Screw rotation rate | 50-90r.p.m. | |
| 4 | Drive motor | 160KW | |
| 5 | Frequency control | Robin condo | |
| 6 | Number of heating sections with air cooling | 21KW×6 | |
| 7 | Heating power | 88 kw | |
| 8 | Vertical adjustment range | 800mm | |
| 9 | Front and rear adjustment range | --- | |
| 10 | Forced cooling jacket in feed section | With | |
| 11 | Gearbox | Hard tooth surface reducer ZLYJ 375 | |
| 12 | Ladder and safety railing | With | |
| Die-head | |||
| 1 | Storage tank volume | 40L about 30kg | |
| 2 | Storage tank volume | First in first out | |
| 3 | Number of heating sections | 8 sections | |
| 4 | Heating power | 56kw | |
| 5 | Maximum die diameter | 950mm | |
| 6 | Adjusting rod | ¢130mm | |
| 7 | Injection stroke detection | Electricgauge GEFRAN |
|
| 8 | Injection pressure | 14Mpa | |
| 9 | Extruder stopped | Stop when the storage is in place or when the storage is full(optional) | |
| Mold opening and closing device | |||
| 1 | Tie rod | Diagonal double tie rod | |
| 2 | Mould platen size | 1500(W)X1500(H) | |
| 3 | Mould thickness | 1200mm | |
| 4 | Clamping force | 2000KN | |
| 5 | Opening and closing stroke | 800-2200mm | |
| 6 | Mould size | 1300×1300mm | |
| 7 | Opening and closing stroke detection | Transducer | |
| Electricgauge GEFRAN | |||
| 8 | Valve | YUKEN | |
| 9 | Number of cylinders | 1 | |
| 10 | High pressure | 14mpa | |
| 11 | Template moving support parts | Linear Guide | |
| Rolling bead straight line guide rail | |||
| Hydraulic System | |||
| 1 | Drive motor | PHASE | |
| Servo motor from Italy | |||
| 2 | Hydraulic valve | YUKEN | |
| 3 | Hydraulic pump | Japan's Sumitomo | |
| 4 | Joints, tubing | Import |
|
| 5 | Seals | Import |
|
| 6 | Fuel tank capacity | 500L(Three barrels) | |
| 7 | Working pressure | 16mpa | |
| 8 | Oil cooling water | With | |
| 9 | Oil temperature and oil level control | Oil temperature detection and abnormal alarm, the oil level is observed by the oil level gauge | |
| Pneumatic system | |||
| 1 | Working pressure | 0.7mpa | |
| 2 | Blowing pressure | 0.6mpa | |
| 3 | Blow needle blowing circuit | High and low pressure control | |
| 4 | Gap blowing | With | |
| 5 | Die-head blowing | With | |
| 6 | Pneumatic electromagnetic reversing valve | Airtac | |
| 7 | Fast exhaust | With | |
| Parison Control | |||
| 1 | Brand | MOOG | |
| 2 | Servo valve | MOOG | |
| 3 | Servo cylinder | Together with die head | |
| 4 | Hydraulic parts | YUKEN | |
| Electrical | |||
| 1 | Contactor | Omron | |
| 2 | Total Power | 320kw | |
| 3 | Average power consumption | 100kw | |
| Cooling water | |||
| 1 | Cooling water for machine | 4500L/hr | |
| 2 | Cooling water for mould | 3000L/hr | |
| Air Consumption | |||
| 1 | Compressed air consumption | 1CBM/hr(pressure 8Kg/cm) | |
| Others | |||
| 1 | PLC control | Mitsubishi | |
| 2 | Touch screen | Weinview | |
| 3 | Formula storage | With | |
| Heating Control | |||
| 1 | Main Heating element | intermediate relay+Contactor | Import |
| 2 | Control | PLC control | |
| 3 | Thermocouple type | k scale division | |
| 4 | Upper and lower limit alarm | With | |
| 5 | Screw cold start protection | With | |
| 6 | Thermocouple and heating disconnection alarm | Thermocouple line alarm, heating line through the outside of the electric box Amammeter observation (optional) | |
| 7 | Pre-heating function | With | |
| Mould core&Mould sleeve | |||
| 1 | Mould core&mould sleeve | According | |
| 2 | Testing material | Customer offer | |
| Optional | According to customer product | ||
| 1 | Bottom blow(hydraulic)&enveloping(Hydraulic) | With | |
| 2 | Robot | With | |
| 3 | Machine Size | 9000×6500×7800mm(L×W×H ) | |
| 4 | Machine Weight | 35T | |
Q: How about your after-sale service ?
We offer manual instruction and engineer training before loading,after shipment we provide 24 HRS online support, video technical support or field installation assist.
Q: What is the lead time?
For customized machine, it takes about 45-60 days after deposit. For stock machine, fast shipment. ( The actual production cycle will vary according to the degree of customization.)
Q: What is the warranty period for your machine ?
12 months warranty for components and technical support .
Q: Do you provide custom machines?
Most of our machines are customized. Our goal is efficiency and stable performance. We design the machines according to customers products to meet customer' needs.
Q: How can we install the machine when it arrives?
We can send experienced technicians to customer's country for guiding the installation and commission the machine, also train the customer's employees.
Q: What's the advantage of SINOTECH?
We provide customers with turnkey projects. Including plant design, plastic machine and mold installation, debugging, also we can source the auxiliary equipments for customers. We can ship the full set of machines after testing in our factory. It will save a lot of cost and time
){kind=link}